This adds the possibility to parse /proc/consoles to find a primary console.
Then, on AArch64 this is used in the installation image. On AArch64, the boot
usually happens with chosen device tree that contains the serial console.
On x86_64, this does not happen so often, so we keep the installation iso
minimal there.
The primary console is chosen, but there is a fallback to any non-virtual one.
Virtual console (/dev/tty0) is skipped, because that one can point to any
console, like /dev/tty1 and so on. So it's not safe to register agetty on it.
* gnu/build/linux-boot.scm (read-linux-consoles): New variable.
* gnu/services/base.scm (default-serial-console): Use primary console as
fallback.
* gnu/system/install.scm (%installation-services): Add agetty tty for
consoles.
Change-Id: Iae01f7bc85b5ffdef2e52b1d0710889915b0f54a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This is to accomodate following situation:
- The proxy is up
- The substitute server is down
When that happens, 5xx is returned from the proxy, typically either Bad
Gateway or Gateway Timeout. This implies the substitute server is down.
Still, for checking if the user is online, we do not check the response code.
If there is a response, even 4xx, 5xx, it still means the user is online.
* gnu/installer/newt/network.scm
(url-alive?): Add optional argument to to check the response code.
(common-urls-alive?): Add the same argument, passing it to url-alive?
(check-substitute-availability): Assume offline when non-successful http code
returned.
Follow up of 9ea2174ba8.
Change-Id: I52ae8a49407009dd76ad5da3925355770bc25d0c
Change-Id: I99a77cb7332198bae84f28a00a6cc0409d5bf3b9
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5217
* gnu/installer/newt/kernel.scm (run-kernel-page): Rename "Hurd" to "Hurd
32-bit (experimental)". On 64-bit, also offer "Hurd 64-bit (highly
experimental!)", and make these strings translatable. Make "Linux Libre" the
first option. Add a line break after "When in doubt...". Upon re-entrry,
use pre-selected kernel as the default. Make sure to always [re]set
%current-target-system, as this page may be revisited and another kernel
choice selected.
* gnu/installer/kernel.scm (kernel->configuration): Update accordingly.
* gnu/installer/final.scm (install-system): Also cater for the 64-bit Hurd by
simply adding --target=(%current-target-system).
Change-Id: I14cb2d2815265b8841c16cf9bcc3857b1024f507
* gnu/packages/llvm.scm (llvm-18)[arguments]: Adjust the tests flag to
skip the tests on powerpc64le-linux.
Change-Id: I2a1c25642b00b29f53be619b72eea27c005f2db8
The tst_calibrationtool test fails on aarch64 due to floating-point
precision issues: QMatrix4x4 comparison fails with tiny differences
(1.11759e-08 instead of exact 0).
* gnu/packages/kde-plasma.scm (plasma-desktop)[arguments]: Add
tst_calibrationtool to test-exclude on aarch64.
Change-Id: I3875329704b50b1ecd3ccea41a355d53deb517cf
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #4846
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Make the variables that depend on %current-system procedures and call them
from package arguments, a thunked field.
* gnu/packages/file-systems.scm
(bcachefs-tools-rust-target): Make it a procedure.
(bcachefs-tools-target/release): Make it a procedure.
(bcachefs-tools-cargo-args): Make it a procedure.
(bcachefs-tools-make-flags): Make it a procedure.
(bcachefs-tools-make-install-flags): Make it a procedure.
(bcachefs-tools-minimal): Call newly made procedure.
(bcachefs-tools): Call newly made procedure.
(bcachefs-tools-minimal/static): Call newly made procedure.
Fixes: #5195
Change-Id: I9f08b3e34f869b8f9f54b71192eff61357e9cc85
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5219
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This seems to have been omitted, currently users on default Guix System
installations do have GUIX_PROFILE set to their ~/.config/guix/current.
This is wrong and can lead to some surprises when sourcing etc/profile
of a Guix profile.
Followup of 50a2d73eac.
* gnu/system.scm (operating-system-etc-services): Clean up GUIX_PROFILE.
Change-Id: Ia5bfb1907fa7ae887ac0336e6cd1922e611b6bdf
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5119
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
To calculate the UUID in `root-uuid`, the operating-system has to have a root
file system, because it's typically used in the
operating-system-boot-parameters.
Followup of efc32c6684 that it partially reverts.
* gnu/system/image.scm (operating-system-for-image): Re-introduce root file
system to operating-system used to calculate the UUID.
Fixes: #5131
Reported-By: Yelninei <yelninei@tutamail.com>
Change-Id: Ica2c3d3715cd90fccf3a7484f390b36de3cdfe7f
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5141
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
These tests currently fail on armhf. They would require large amount of time
or knowledge to be fixed and it's on a platform that's already not being
supported too well.
Followup of d339785a0f.
* gnu/packages/package-management.scm (guix): Disable new tests in
tests/syscalls.scm on arm32.
Change-Id: I056fb04a9a1230ed3d8718a4719a5f6d7010b847
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
To synchronize the artifacts made from Cuirass, pre-inst-env
and time-machine, drop the url from provenance sexp.
* gnu/installer.scm (provenance-sexp): Drop url.
Change-Id: Ibe2515abdc92853ce06c0381dd03cc61b2077335
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Prefer parameterization of current-guix in release artifacts
generation.
* gnu/system/install.scm (%installation-service): Use (current-guix)
directly in guix service configuration.
Change-Id: Ifa363465e6a4f6936d0e51eaf1b33872519e2b0a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This simplifies things thanks to the release artifacts now, they have been
rewritten to Guile and can now supply current-guix-package as a parameter, as
was intended. That way the checkout is not leaked for the release artifacts.
* gnu/system/examples/vm-image.tmpl
(guix-package-commit): Remove variable.
(operating-system): Use (current-guix) directly.
* gnu/system/examples/vm-image-efi.tmpl: Likewise.
Change-Id: Iabf1bb5bbb86b9984bfb87ba0543782a6dce3192
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
* gnu/system/image.scm (system-iso9660-image): Use name from image-name
instead of hardcoded image.iso.
Change-Id: I3cea3857729c2eb7d6728f650db7fb33cf4c8c8a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Adds mmio and scsi modules for virtio. scsi one is needed for using
virtio-scsi-pci, that can be a common option on aarch64, where only two
options pop up for mounting disks:
- virtio-scsi-pci
- virtio-blk
While virtio-blk should generally be preferred, sometimes virtio-scsi-pci pops
up first on the internet, so people can use it.
virtio-mmio is a necessity on Aarch64 for virtio-blk to work.
* gnu/system/linux-initrd.scm (default-initrd-modules): Add virtio_mmio and
virito_scsi.
Change-Id: Ia8fabb5594893ef1712359d27d482d9f44dc89c0
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This is a copy of vm-image.tmpl, but with
efi bootloader. Since user ends up with this
config in their /run/current-user/configuration.scm
and the regular way to continue is to copy
that file and reconfigure off of it, it seems
better to just keep distinct configuration.
Moreover xf86-video-intel is removed,
because it doesn't compile on aarch64.
* gnu/system/examples/vm-image-efi.tmpl
Change-Id: I0f72ac5a775339ee84cb1a4046ca5a8deca0e2ea
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
The xorg modules are used inside of services that's thunked. So we can
make them depend on the %current-system.
* gnu/services/xorg.scm
(default-xorg-modules): New variable.
(%default-xorg-modules): Return result of (default-xorg-modules).
Change-Id: I10f722e52d598ce3e83ef3f200b3bd953bc08e17
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Because the linux image is called differently based on the architectures,
see system-linu/-image-file-name from gnu/system.scm, the kernel image
on aarch64, mips and armhf has still been compressed. This means that
grub cannot boot.
Man pages have moved from gz to zst, so compress them as well.
* gnu/build/image.scm (make-iso9660-image): Do not compress Image, vmlinuz and
zImage; Compress all man pages.
Change-Id: I68b35f383c84ff231865d580aa9e79d9fd88ace1
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Aarch64 doesn't support grub-pc, so we cannot
use the regular grub-bootloader, grub-efi-bootloader
has to be used.
Since neither packages nor bootloader are thunked,
there seems to be no other choice than using something
from the outside environment, such as an environment
variable to decide what bootloader to use.
For convenience, a procedure is made to be used from
other Guile code, instead of relying on environment
variables.
* gnu/system/install.scm
(make-installation-os): New variable; Use grub-efi-bootloader when
efi-only? is #t; Use bootloader package in packages instead of grub-pc.
(installation-os): Replace with call of make-installation-os with default
arguments.
Change-Id: I34ec8da6079617f39805b3e1168bad4a42d84cab
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Instead of forgetting about the /boot/efi system completely, re-add it
with proper label. This way lightweight.tmpl, desktop.tmpl still
boot when supplied to guix system image. That was the reason for
removing /boot/efi file-system in the first place. Removing it however
means the target system cannot be reconfigured by default, as the
esp is not mounted.
* gnu/system/image.scm
(partition-has-flag?): New variable.
(root-partition?): Use it.
(find-partition-with-flag): New variable.
(find-root-partition): Use it.
(find-esp-partition): New variable.
(operating-system-for-image): Add /boot/efi file-system with proper
label instead of removing it completely.
Change-Id: I3ef2120059d8bbf76170d10ae718cb0de637f453
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
qcow2 is a mbr-hybrid image. But on aarch64, we
have to use grub-efi bootloader. For that bootloader,
gpt should be used and Guix errors if it isn't (due to
failed check in Guix code). So it's impossible to generate
qcow2 type aarch64 image without using customized bootloader.
One would have to define their own image instead of using
the ones pre-defined.
* gnu/system/system.scm (qcow2-gpt-image-type): New variable.
* doc/guix.texi: Document qcow2-gpt and its use.
Change-Id: I93f0880c7ca2d3f934067c12dd1143ad20828333
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Let the user decide for grub/grub-efi in cases where
grub-hybrid is unsupported. This is the case on
aarch64, where grub-pc is not supported, so only
grub-efi can be used.
* gnu/system/image.scm (operating-system-for-image):
Do not replace bootloader with grub-mkrescue-bootloader
for iso9660 when grub-hybrid is not supported.
Change-Id: Icd2b68155935b1d9599c1b0df22f0c80a2e36d6a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Followup to e1038aee6d.
Previously when cross compiling the fibers directory was reset to fibers 1.3
because evaluating the arguments of shepherd@0.10 with '(package-arguments
shepherd-0.10)' kept the reference to the fibers input of shepherd@0.10.
Work around this by not using 'substitute-keyword-arguments' and replacing
'this-package-input' with 'search-input-file'.
* gnu/packages/admin.scm (shepherd-1.0)[arguments]:
Replace 'substitute-keyword-arguments' with explicit arguments.
Use search-input-file in 'set-fibers-directory phase to search for the cross fibers.
Change-Id: Ia1061d8cea531569385f4a0136cfd22f27ce5a0e
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Merges: #4672
Commit 7c70a1080a0823fd3dd0f7ee83e5d7654ab6a872 ("gnu/system: Simplify the
creation of /etc (was: Turn /etc/localtime into a symlink)") made all of the
files under /etc other than sudoers symlinks to their store target. This
causes a problem at least for the vpn-slice service, which expects to be able
to write to said file.
* gnu/build/activation.scm (activate-etc): Special-case /etc/hosts to make it
a regular file.
Change-Id: Ia42dacd8731edba5e72442ab0399bdc3f7101989
Signed-off-by: Maxim Cournoyer <maxim@guixotic.coop>
Modified-by: Maxim Cournoyer <maxim@guixotic.coop>
Fixes: #4800
* gnu/packages/luanti.scm (luanti-mineclonia)
[synopsis]: Drop leading article.
[description]: Use double spaces.
Change-Id: I3c0decb3135cbdeb925636633e16bc3a9267f53a
* gnu/packages/containers.scm (podman-compose):
[arguments] <test-backend, test-flags>: Use unittest as seen in
project's GitHub Actons.
<phases>: Remove 'pre-check.
[native-inputs]: Remove python-pytest and python-wheel.
Change-Id: I6da2f7f4c55f4cd22919d7f7827b2be58993f2e2
* gnu/packages/containers.scm (podman-compose): Update to 1.5.0.
[arguments] <test-flags>: Only run tests in `tests/unit`.
[arguments] <phases>: Add before-checks phase to fix a ModuleNotFoundError.
Change-Id: Ia9b8900bd71c848559b067d48e7eb4bf212f0f73
Signed-off-by: Sharlatan Hellseher <sharlatanus@gmail.com>
