This option that adds new hardware support appeared after the 5.17 release.
* gnu/packages/aux-files/linux-libre/5.17-arm.conf,
gnu/packages/aux-files/linux-libre/5.17-arm64.conf,
gnu/packages/aux-files/linux-libre/5.17-i686.conf,
gnu/packages/aux-files/linux-libre/5.17-x86_64.conf: Enable support for Realtek
Ethernet switch chips.
Without this it is apparently impossible to mount file systems with the
feature, which apparently some distributions do by default now.
podiki[m]> I have an sdcard that was formatted with ext4 casefold
[by Arch Linux], cannot be mounted
* gnu/packages/aux-files/linux-libre/5.10-arm.conf,
gnu/packages/aux-files/linux-libre/5.10-arm64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-arm.conf,
gnu/packages/aux-files/linux-libre/5.15-arm64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.16-arm.conf,
gnu/packages/aux-files/linux-libre/5.16-arm64.conf,
gnu/packages/aux-files/linux-libre/5.16-i686.conf,
gnu/packages/aux-files/linux-libre/5.16-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-arm.conf,
gnu/packages/aux-files/linux-libre/5.4-arm64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf:
Set CONFIG_UNICODE=y.
These changes broke the creation of the 'linux-modules-database' for all kernel
series besides 5.15, 5.4, and 5.10, like this:
------
gnu/build/linux-modules.scm:257:5: kernel module not found "framebuffer_coreboot" "/gnu/store/yff45fr6q93mw44zdql9ffr95zcvwxcn-linux-libre-4.9.299/lib/modules"
------
We should support the coreboot framebuffer, but we need to test that change more
completely before deploying it.
This effectively reverts the following commits:
1dfe8c3721 "gnu: linux-libre: Build simplefb into all x86{,_64} kernels."
bc09e7ab56 "gnu: linux-libre: Support the Coreboot framebuffer."
Fixes <https://issues.guix.gnu.org/52667> "System reconfiguration fails to build
linux-modules.drv".
Add the CONFIG_SND_EMU10K1=m and CONFIG_SND_EMU10K1_SEQ=m kernel options to
all of our x86 and ARM configurations. The change automated via:
$ git grep -rl CONFIG_SND_INDIGODJX | xargs grep -rL CONFIG_SND_EMU10K1=m \
| xargs sed '/CONFIG_SND_INDIGODJX=m/a\
CONFIG_SND_EMU10K1=m\nCONFIG_SND_EMU10K1_SEQ=m' -i
ZONE_DMA is still used by some kernel drivers such as older sound and network
cards; it was already enabled on ARM and for some i686 kernels. Enable it
everywhere for consistency. The change was automated with:
$ git grep -rl CONFIG_ZONE_DMA | \
xargs sed 's/# CONFIG_ZONE_DMA is not set/CONFIG_ZONE_DMA=y/' -i
* gnu/packages/aux-files/linux-libre/4.14-x86_64.conf: Enable CONFIG_ZONE_DMA.
* gnu/packages/aux-files/linux-libre/4.19-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/4.4-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/4.9-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.10-i686.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.10-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.15-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.16-i686.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.16-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.4-x86_64.conf: Likewise.
Fixes <https://issues.guix.gnu.org/53329>, "Integrated keyboard doesn't work
(Lenovo N22)". Reported by Jack Ridehalgh <jack@ridehalgh.uk>.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf: Set
CONFIG_PINCTRL_CHERRYVIEW=y.
This option defaults to "N", so this fix does not change the effective
kernel configuration.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
nu/packages/aux-files/linux-libre/5.15-x86_64.conf: Replace "unset" with "not
set".
This attempts to mitigate <https://issues.guix.gnu.org/52667>.
It makes linux-libre@5.15 consistent with older versions which do not
support a modular simplefb, allowing a single %base-initrd-modules
simple list for all of them.
Unlike CONFIG_FB_SIMPLE=m, CONFIG_FB_SIMPLE=y conflicts with
CONFIG_DRM_SIMPLEDRM, so the latter is now disabled. Let us hope it is
not missed.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Unset CONFIG_DRM_SIMPLEDRM to build in CONFIG_FB_SIMPLE=y.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Remove "simplefb".
Without this, the kernel cannot write to the display until the
full-featured driver module (often i915) is loaded from the root file
system.
If the root file system is encrypted, the initrd's passphrase prompt
won't make it to the screen, and the fully responsive system will appear
frozen whilst waiting for user input.
* gnu/packages/aux-files/linux-libre/4.4-i686.conf,
gnu/packages/aux-files/linux-libre/4.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Mark simple framebuffers as generic system ones and enable ‘Google’
firmware drivers to enable Coreboot table support and its dependent
framebuffer driver module.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Add the framebuffer_coreboot and simplefb modules on x86 systems.
For more information about these configuration options, read
<https://www.kernel.org/doc/Documentation/cpu-freq/governors.txt> or the
document 'Documentation/admin-guide/pm/cpufreq.rst' in the linux-libre
source distribution.
* gnu/packages/aux-files/linux-libre/4.14-arm.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-arm.conf,
gnu/packages/aux-files/linux-libre/4.19-arm64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.9-i686.conf,
gnu/packages/aux-files/linux-libre/4.9-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.12-i686.conf,
gnu/packages/aux-files/linux-libre/5.12-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.13-i686.conf,
gnu/packages/aux-files/linux-libre/5.13-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-arm.conf,
gnu/packages/aux-files/linux-libre/5.4-arm64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf: Unset
'CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE' and set
'CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y'.
Requested by PsixisP on #guix:
“I have a laptop that requires CONFIG_VMD (Intel's software RAID) in
order for the kernel to see the internal NVMe drive. This is not
present in the default Guix kernel.”
* gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.9-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.12-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf:
Enable modular CONFIG_VMD.
and arm64.
This has been the recommended default for arm and arm64 since v5.9
(upstream commit f259eab3ea0e7ed73db91f6358274dd3a9a27d79).
* gnu/packages/aux-files/linux-libre/5.12-arm.conf,
gnu/packages/aux-files/linux-libre/5.12-arm64.conf: Enable
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL, disable
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE.
This has been the recommended default for arm and arm64 since since
v5.9 (upstream commit f259eab3ea0e7ed73db91f6358274dd3a9a27d79).
* gnu/packages/aux-files/linux-libre/5.10-arm.conf,
gnu/packages/aux-files/linux-libre/5.10-arm.conf,
gnu/packages/aux-files/linux-libre/5.11-arm.conf,
gnu/packages/aux-files/linux-libre/5.11-arm.conf: Enable
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL, disable
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE.
This is a followup to commit 8727870ff4.
* gnu/packages/aux-files/linux-libre/5.9-arm.conf,
gnu/packages/aux-files/linux-libre/5.9-arm64.conf,
gnu/packages/aux-files/linux-libre/5.9-i686.conf,
gnu/packages/aux-files/linux-libre/5.9-x86_64.conf: Delete files.
* Makefile.am (AUX_FILES): Remove them.
Add the 32x16 Terminus font for ‘high-DPI’ screens, and a 6x10 font that
allows for more (debugging) information to be displayed on standard-DPI
ones, while still being pleasant to read.
* gnu/packages/aux-files/linux-libre/4.14-arm.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-arm.conf,
gnu/packages/aux-files/linux-libre/4.19-arm64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.4-i686.conf,
gnu/packages/aux-files/linux-libre/4.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.9-i686.conf,
gnu/packages/aux-files/linux-libre/4.9-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-arm-veyron.conf,
gnu/packages/aux-files/linux-libre/5.4-arm.conf,
gnu/packages/aux-files/linux-libre/5.4-arm64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf:
Set CONFIG_FONTS=y, CONFIG_FONT_TER16x32=y, and CONFIG_FONT_6x10=y.
This is a followup to commit 4845dee706.
* gnu/packages/aux-files/linux-libre/5.2-arm-veyron.conf,
gnu/packages/aux-files/linux-libre/5.2-arm.conf,
gnu/packages/aux-files/linux-libre/5.2-arm64.conf,
gnu/packages/aux-files/linux-libre/5.2-i686.conf,
gnu/packages/aux-files/linux-libre/5.2-x86_64.conf: Delete files.
* Makefile.am (AUX_FILES): Remove them.
* gnu/packages/aux-files/linux-libre/4.19-arm.conf,
gnu/packages/aux-files/linux-libre/4.19-arm64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.2-arm.conf,
gnu/packages/aux-files/linux-libre/5.2-arm64.conf,
gnu/packages/aux-files/linux-libre/5.2-i686.conf,
gnu/packages/aux-files/linux-libre/5.2-x86_64.conf: Set CONFIG_NF_TABLES_INET,
CONFIG_NF_TABLES_NETDEV, CONFIG_NF_TABLES_IPV4, CONFIG_NF_TABLES_IPV6 and
CONFIG_NF_TABLES_BRIDGE to 'y', and related options to 'm'.
When running qemu-img from (gnu system vm) with an aarch64 kernel, mounting
ext4 partitions fails because no modprobe of ext4 module is made. Like for
other kernel configs, provide built-in support for ext4 partitions.
* gnu/packages/aux-files/linux-libre/5.2-arm64.conf: Enable built-in ext4,
like in intel and armhf configs.
