Without this change, the rock-4c-plus boots fine and we can see the serial
port output is fine, but only part of what is typed through the serial port
reaches the console. This makes it very difficult to type commands.
And with this change, the serial port is already activated automatically and
in that case we can interact well with the console.
* gnu/system/images/rock-4c-plus.scm (rock-4c-plus-barebones-os):
remove serial port service.
Change-Id: Ieb87f2ed6054b529ffa4399fcf4ec997e3e454a6
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
This is useful when separating rootfs into many mount points, especially for
mounting tmpfs as /. Mount points in this change are found and tested by
booting from a clean rootfs with such setup.
* gnu/system/file-systems.scm (file-system-needed-for-boot?): Mark /etc,
/var/lib and /var/log as needed for boot.
Merges: #8345
This is also needed in containers for defining the various protocols; its
absence would cause error like, for example with Perl:
IO::Socket::INET6: sock_info: Bad protocol 'tcp'
* gnu/system/file-systems.scm (%network-configuration-files): Register
/etc/protocols.
Change-Id: I871cd01a0eac4f979d1e6e3614972fac8d1a5e0f
Fo guile to run, it needs pipe support: without pipe support it aborts at
startup. Pipe support is currently createn in runsystem by creating a
passive translator
settrans --create /servers/socket/1 /hurd/pflocal
However, this needs a writable root file-system, and runsystem is started with
a readonly root file-system.
This patch enables running guile early in runsystem, and thus prepares for
replacing the runsystem shell script with a guile program, by embedding the
servers/socket/1 passive translator into the hurd system image using xattr.
* gnu/build/hurd-boot.scm (make-hurd-device-nodes): Change optional root
parameter to keyword #:root. Add #:hurd keyword parameter. Use it to
create servers/socket/1 (pipe) and proc passive xattr translators.
* gnu/build/image.scm (initialize-root-partition): Update caller.
* gnu/system/image.scm (with-imported-modules*): Include (ice-9 optargs).
* gnu/system/images/hurd.scm (hurd-initialize-root-partition): Use it to
update caller.
* guix/scripts/system.scm (install): Update caller.
Change-Id: Ib3a672ae78bd969a2a4c0e33db8e38ccf71238ba
Merges: #8609
Since 306bd80481 ("system: Source scripts from the /etc/profile.d
directory."), /etc/profile a glob which does not silently fail on zsh,
which by default does not enable NULL_GLOB.
* gnu/system/shadow.scm (%default-zprofile): Use emulate sh
to source profile scripts.
Change-Id: Ia647682fc7a35afe448d56a99f866f31da0de145
Merges: https://codeberg.org/guix/guix/pulls/8479
Signed-off-by: Nguyễn Gia Phong <cnx@loang.net>
Because kmscon-9 lacks the patch to change keyboared layout in the installer.
* gnu/system/install.scm (%installation-services)[kmscon-service-type]: Set kmscon to kmscon-8.
Change-Id: Ib12d9ec8f32042dce8ade66bf042ae32a7d05e2c
Signed-off-by: Hilton Chain <hako@ultrarare.space>
Merges: #7381
Previously, modules we want were not normalized before comparing with
builtin-modules, which was normalized by file-name->module-name.
This made the code unable to find modules like nls_iso8859-1 (normalized to
nls_iso8859_1) and usb-storage (normalized to usb_storage) when they're built
into the kernel.
* gnu/system/linux-initrd.scm (flat-linux-module-directory) [modules-to-lookup]:
Normalize module name before comparing with builtin ones.
Change-Id: Ifb3ab298b8435c38040a6d58cdb53a3a46eb8ee1
Merges: #7514
This is a follow-up to commit
e54d574add
gnu: guix: Depend on 'graphviz-minimal'.
(and subsequent bumping of the guix package).
* gnu/system/examples/devel-hurd.tmpl (guix-packages): Also remove
graphviz-minimal.
Change-Id: Icae506f0a442ae44fbd98dc1974bf6571bddd883
On x86_64-gnu, that only works with RumpDISK, the GRUB bootloader
configuration always inserts "noide".
* gnu/system/examples/bare-hurd64.tmpl (%hurd64-os)[kernel-arguments]:
Remove.
Change-Id: Ic648d88ea4171adaa0f932436fbeaadb208cdbfa
By default, GDB does not save history. This improves on the default.
* gnu/system/shadow.scm (%default-gdbinit): Add ‘set history’ commands.
(gdb-history-placeholder): New variable.
(default-skeletons): Add it.
Change-Id: Ie3f9c26098066b4bd896b0593546015a1b429209
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Merges: #6559
This fixes a bug whereby ‘file-exists?’ would be called on tilde-prefixed
directory names before tilde expansion has taken place. As a result,
~/.guix-profile and ~/.guix-home/profile would never be included in
‘debug-file-directory’.
* gnu/system/shadow.scm (%default-gdbinit): Remove call to ‘file-exists?’.
Change-Id: I3a6bf1fec6bfbf208679d030dd6b380b9c6a4789
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
The file transitively depends on vboot-utils, which does not build
and which depends on python2. This effectively reverts commit
df2a96167f .
* gnu/system/examples/asus-c201.tmpl: Remove file.
* Makefile.am (EXAMPLES): Unregister file.
Change-Id: I90683a01fc53c0491a77670c850c7afe6026c878
Bug https://bugs.gnu.org/28768 no longer needs working around.
* gnu/system/vm.scm (virtualized-operating-system): Don't override the
bootloader of the system configuration used.
Change-Id: I495f59a6edd7929e2d47276db53fd86a89ac95e9
Signed-off-by: Efraim Flashner <efraim@flashner.co.il>
Directories have been supported in skeleton names since
d9ea94dc44.
* gnu/system/shadow.scm (default-skeletons): Add directories to skeleton names.
(skeleton-directory): Remove special cases of directory creation.
Change-Id: I7918498c2ff115ad8d1f5e3472678da1db8b4f2e
Signed-off-by: Hilton Chain <hako@ultrarare.space>
* gnu/system/linux-container.scm: Re-export %namespaces and %writable-/tmp,
which are from (guix build linux-container).
Change-Id: Iaad362247825e30fb6837af013018f2c472c19fa
Fixes <https://issues.guix.gnu.org/75458>.
Fixes a bug whereby bootloader, image, platform, etc. modules would be
searched for in locations other than the current profile, possibly leading to
incompatible files being loaded. More generally, this bug would break
statelessness: depending on what happens to be available in $GUILE_LOAD_PATH,
some modules would or would not be loaded.
* guix/describe.scm (modules-from-current-profile): New procedure.
* gnu/bootloader.scm (bootloader-modules): Use it instead of ‘all-modules’.
* gnu/system/image.scm (image-modules): Likewise.
(not-config?): Rename to…
(neither-config-nor-git?): … this, and add (guix git). Adjust users.
* guix/import/utils.scm (build-system-modules): Likewise.
* guix/platform.scm (platform-modules): Likewise.
* guix/upstream.scm (importer-modules): Likewise.
Change-Id: I8ac55a5bcdf54990665c70d0aa558b9b2c2548d4
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Merges: #4859
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This is a followup to 8492a3c896.
* gnu/system/hurd.scm (%base-services/hurd): Replace
‘syslog-service-type’ by ‘shepherd-system-log-service-type’.
Change-Id: I3e12087a04f06210bd10b649b29fcf9949c5aa35
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Merges: #2659
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
* gnu/services/desktop.scm
(desktop-services-for-system): Use gdm on all 64-bit systems.
* gnu/services/xorg.scm (set-xorg-configuration): Adapt to
desktop-services-for-system change.
* gnu/system/examples/desktop.tmpl: Determine the support of Gnome by checking
for supported package.
Fixes: #5388
Change-Id: I0d512a7c31188cea0335e66f00a6d65ae59d09a4
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
The state is not great, there are many unsupported devices in the current
state. This adds support for much more USB controllers than before and also
SD cards.
* gnu/system/install.scm (%installation-initrd-modules): Add a lot of new
modules to support booting on various devices
Change-Id: I523ebe992a7e3740708622899d1209f20eb23e63
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5320
To allow users in headless consoles to use the graphical installer, add an
executable. This executable is referred to by the console motd, so users
in headless setups will get to know about it.
* gnu/system/install.scm
(installer-command-package): New variable.
(%installation-services): Use it, add it to the profile-service-type
Change-Id: Id2d07b3f190aa17c99c7667c3bb31ae696499dde
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5346
motd is shown by the pam module, it doesn't support changing what motd gets
displayed easily. The only way to control it is by read permissions on
individual motd files, making files unreadable by the user logging in.
So instead of that, make a custom script that prints different motd,
checking if a temporary file exists. An environment variable would be better
suited for this purpose, but those aren't passed through by PAM.
* gnu/system/install.scm
(%installation-login-pam-service): New variable. Modified login pam service.
(%installation-console-login): New variable. Wrapper around login to create a
file for PAM rule.
(%installation-services): Use new login pam service and wrapper.
Change-Id: I5e05e604b3106390181190559ade62ca5e2db216
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This adds the possibility to parse /proc/consoles to find a primary console.
Then, on AArch64 this is used in the installation image. On AArch64, the boot
usually happens with chosen device tree that contains the serial console.
On x86_64, this does not happen so often, so we keep the installation iso
minimal there.
The primary console is chosen, but there is a fallback to any non-virtual one.
Virtual console (/dev/tty0) is skipped, because that one can point to any
console, like /dev/tty1 and so on. So it's not safe to register agetty on it.
* gnu/build/linux-boot.scm (read-linux-consoles): New variable.
* gnu/services/base.scm (default-serial-console): Use primary console as
fallback.
* gnu/system/install.scm (%installation-services): Add agetty tty for
consoles.
Change-Id: Iae01f7bc85b5ffdef2e52b1d0710889915b0f54a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
The current version of `mkfs.btrfs` has a regression when combined with
`fakeroot` where it does not detect the faked root uid/gid of files when
building the filesystem. This produces partition images with `/` owned by
the guixbuild user when it should be owned by root.
Using `unshare` rather than `fakeroot` resolves this by doing the uid
mapping at the kernel level rather than overloading the `stat` function.
An equivalent issue was [reported and patched in
NixOS](https://github.com/NixOS/nixpkgs/pull/434122)
* gnu/build/image.scm (system-disk-image): Import `util-linux` instead of
`fakeroot`.
* gnu/system/image.scm (make-btrfs-image): Use `unshare --map-root-user`
Change-Id: Id4eeaf510f3ec5f4a23b4d700a73e2cf46da40b1
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Merges: #5536
To calculate the UUID in `root-uuid`, the operating-system has to have a root
file system, because it's typically used in the
operating-system-boot-parameters.
Followup of efc32c6684 that it partially reverts.
* gnu/system/image.scm (operating-system-for-image): Re-introduce root file
system to operating-system used to calculate the UUID.
Fixes: #5131
Reported-By: Yelninei <yelninei@tutamail.com>
Change-Id: Ica2c3d3715cd90fccf3a7484f390b36de3cdfe7f
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5141
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
To calculate the UUID in `root-uuid`, the operating-system has to have a root
file system, because it's typically used in the
operating-system-boot-parameters.
Followup of efc32c6684 that it partially reverts.
* gnu/system/image.scm (operating-system-for-image): Re-introduce root file
system to operating-system used to calculate the UUID.
Fixes: #5131
Reported-By: Yelninei <yelninei@tutamail.com>
Change-Id: Ica2c3d3715cd90fccf3a7484f390b36de3cdfe7f
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5141
Prefer parameterization of current-guix in release artifacts
generation.
* gnu/system/install.scm (%installation-service): Use (current-guix)
directly in guix service configuration.
Change-Id: Ifa363465e6a4f6936d0e51eaf1b33872519e2b0a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This simplifies things thanks to the release artifacts now, they have been
rewritten to Guile and can now supply current-guix-package as a parameter, as
was intended. That way the checkout is not leaked for the release artifacts.
* gnu/system/examples/vm-image.tmpl
(guix-package-commit): Remove variable.
(operating-system): Use (current-guix) directly.
* gnu/system/examples/vm-image-efi.tmpl: Likewise.
Change-Id: Iabf1bb5bbb86b9984bfb87ba0543782a6dce3192
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
* gnu/system/image.scm (system-iso9660-image): Use name from image-name
instead of hardcoded image.iso.
Change-Id: I3cea3857729c2eb7d6728f650db7fb33cf4c8c8a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Adds mmio and scsi modules for virtio. scsi one is needed for using
virtio-scsi-pci, that can be a common option on aarch64, where only two
options pop up for mounting disks:
- virtio-scsi-pci
- virtio-blk
While virtio-blk should generally be preferred, sometimes virtio-scsi-pci pops
up first on the internet, so people can use it.
virtio-mmio is a necessity on Aarch64 for virtio-blk to work.
* gnu/system/linux-initrd.scm (default-initrd-modules): Add virtio_mmio and
virito_scsi.
Change-Id: Ia8fabb5594893ef1712359d27d482d9f44dc89c0
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Denis 'GNUtoo' Carikli